Current Position:Home > PI Synchronous channel setting

PI Synchronous channel setting

Advertisement
  • SOAP synchronous channel specific call time out configuration Updated:11-30

    Hi, This is regarding channel specific timeout configuration in SOAP sender and receiver channel. We are having SOAP to Proxy synchronous web services. One of the web service is taking longer to execute the RFC's in ECC and getting the results back t

  • Concurrent modification exception inside fully synchronized code Updated:11-30

    Hello, We have a private list private LinkedList<ConnectionChannel> channels = new LinkedList<ConnectionChannel>();that is accessed by multiple threads. One is traversing the items and operating on them, while another thread is adding and remo

  • 0x80230729 (The extension could not be loaded.) Updated:11-30

    Hi, I've been working on this most of the day without any luck. I'm wondering if anyone has seen something like this. PCNS can successfully deliver the password change to an AD target, so PCNS should be OK. The failure occurs when we add the Oracle E

  • Problem while SocketChannel registers with selector Updated:11-30

    Hi , I am coming across problem when i tries to register channel (SocketChannel) with Selector. Following is the scenario: 1) I create selector in main program 2) I spawns thread and calls (selector.select()) in that thread using created selector in

  • NIO SocketChannel non-blocking read Updated:11-30

    Hello. I'm not sure a resembling message has already been posted in a forum. In such a case, thanks for redirecting to it. Goals : A selector is used by a main server thread to make accept and read operations non-blocking. When a connection is accept

  • Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario Updated:10-11

    Hi all, We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message. SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEP

  • FILE to SOAP synchronous scenario - config of SOAP channel Updated:10-11

    Hi All, I have a scenario where I want PI to pull some files from 3rd party application. Adapters to be used: SOAP receiver, FILE adapters. I am aware of the use of Request/Response beans in File sender channel and the File receiver channel to dump t

  • Sender JMS Synchronous communication channel not picking up files from JMS Updated:10-11

    Hello, One of our Sender JMS synchronous communication channel (used Sync/Async bridge in the module section to make it Synchronous) is not picking up files from JMS system though the channel looks to be active (greeen). When I am trying to stop the

  • Issue in  Synchronous SOAP Communication channel Updated:10-11

    hi Experts,    I stuck in one scenario where my requirment is:-- At Receiver side SOAP adapter(which is Synchronous Communication) accepts data  as Attachment. But the response mustn't be in form of attachment. If i use Keep Attachment at SOAP receiv

  • How to make a synchronous acquisition of two analog signals with a one channel DAQ ? Updated:11-30

    Hi ! It is the first time I use Labview. I have just made some easy VIs, and now, I do not know how to deal with my problem... My problem : I have only one acquisition card (DAQ Ni 6034E) and I would like to acquire simultaneously two analog signals.

  • Response communication for synchronous JDBC channel Updated:11-30

    Hi, We have a Proxy->XI-> JDBC synchronous interface. Is there a necessity for a response receiver communication channel? We just set one up and it always fails with a select statement "Select * from payroll where enddate = "20081012"

  • 2 channel CTR0/CTR1 ouput synchronously Updated:11-30

    I am using PXI-6259 under Measurement studio VC++ and trying to generate 2 counter output synchronously. ********** DAQmx *************** //set output channels  (DAQmxCreateCOPulseChanFreq(CTR0_Task,"Dev3/ctr0ev3/ctr1","",DAQmx_Val_Hz,

  • Trouble synchronizing all 20 channels of Fluke Hydra 2625A data logger Updated:11-30

    Hi, I am using Labivew 8.5. I connected a hydra datalogger through a serial (RS232) connection. I have installed the driver and made it to work with 20 channels. However I am having a little trouble synchronizing the datalogger. As I read the values

  • Time out at communication channel type SOAP and RFC(synchronous interface) Updated:11-30

    Hello Experts. I have a some interfaces here that have a Sender SOAP channel and Receiver RFC channe. We have problens with Timeout with soap channel and expiration with RFC time channel. I need a way to keep de connection alive in these interfaces,

  • Synchronous message stops at inbound channel response Updated:11-30

    Hi, We have an outstanding issue in PI where our synchronous messages stops after receiving the response from the Receiver system. This is an ABAP proxy - JDBC scenario. We already increased the ICM Keep Alive timeout from 600 to 900 seconds but stil

  • Multiple channel AI measuremen​t in the same module with synchronis​ed AO Updated:11-30

    I  am using NI -9172  for measurment. I am trying to mesure two  AI voltage signals on the same module (NI9215).A sinosoidal  analog input voltage is generated using NI 9263. The AI and AO are synchronised using Ai start trigger signal from NI 9263(

  • Need quick help, please!!! How do I scan the counter and analog channel in parallel, synchronized? Updated:11-30

    Hi, I'm using LabView6.1 and a PCI6014 DAQ card. I have to scan simultaneously an analog channel and the counter on the card. My project requires me to measure in parallel a force (a voltage on an analog channel) in correspondence to a distance (meas

  • Error in the SOAP   Receiver communication channel Updated:10-11

    Hi ,         My scenario is RFC - to -SOAP (synchronous )   i have  specified the TARGET URL inthe   SOAP receiver  comminication chanel.. but  while testing  the interface   by providing the test  data from R/3 ..  I'm not getting any Respose.. .. I

  • Error: Couldn't find delivery channel for message Updated:10-11

    Hi All, In our production environment, we sometime get the following error (Channel Audit Log): 2009-01-12 15:08:47 Error Unable to find channel ID 2009-01-12 15:08:47 Error Delivery of the message to the application using connection SOAP_http://sap.

  • Crackling, Left Rear Channel noise, IRQs, 4 Gigs of Memory, fixes and problems with XFi Fatal Updated:10-11

    Hello fellow troubleshooters. Well I've been working on my XFI issues since there are so many of them trying to make the one piece in my newly built system work as intended. I will put my hardware info below this post for comparison purposes if it he