Current Position:Home > nme cue 2951

nme cue 2951

Advertisement
  • Cisco Unity Express (NME-CUE) Compatibility for CUCM 9.1.2 Updated:11-30

    I unable to find latest Compatibility matrix for Cisco Unity Express (NME-CUE) module for integrating with CUCM 9.1.2 The URL:  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.html is updated with CUCM 9.0 only. Req

  • NME-CUE Port adapter is disabled Updated:11-30

    Hi Guys, in need of a little help, i'm trying to install a NME-CUE into a CISCO3845 but the card is showing as disabled Installed  c3845-spservicesk9-mz.150-1.M10.bin and PVDM2-64 Slot 1:         Integrated Service Engine Port adapter, 1 port        

  • Cisco Unity Express NME-CUE %ARP-4-NULL_SRC_MAC Updated:11-30

    Hi I have connected NME-CUE to the router C2811. The module works all good for voicemail. Now, when Im trying to upgrade the software from version 7.1.6 to 8.6.7, using the 'Clean Install Method' it wont work. From the "BOOT-ASM" menu, after pre

  • Configure connectivity on nme-cue Updated:11-30

    My nm-cue died and all we have as a replacement is a nme-cue. I tried to apply the current config from the nm-cue to the nme-cue and I can't ping it from the router to the nme-cue. This was the working config from the NM-CUE FastEthernet0/0.20 10.3.3

  • Maximum AA-ports NME-CUE version 7.0 Updated:11-30

    Hi there, What is the maximum number of AA-ports I can use with NME-CUE version 7.0? Thanks Sent from Cisco Technical Support iPhone AppHello, Please see Table-4 in the Release Notes: http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_0/rel

  • NME-CUE stuck in waiting after upgrade from 8.5 to 8.6 Updated:10-11

    Hi, I have been trying to upgrade our CUE from 8.5.4 to 8.6.4, but after the upgrade it is stuck in the below stage. Any help would be much appreciated.         Welcome to Cisco Service Engine Power button monitor started Setting the system time from

  • Upgrading CUE 7.0 to CUE 8.6 on Cisco 2821 NME-CUE Updated:11-30

    Hi guys, I read that migration form CUE 7.0 to 8,6 if possible, but I dont undersantd for license,  this link tell that I contact with license page for migrate the license of mi actualy CUE 7.0, the question is, this migration has a cost? o is free i

  • CUE 8.5.1 NME-CUE web page setup no setup initialization and error: Login to CUCME failed Updated:10-11

    When first login in via the web page.  When going to Configure menu and choosing CUCME to enter it manually, I get: Error: Login to CUCME failed with the new values.  Check the new CUCME configuration and enter the correct values. hostname: 172.23.0.

  • CUE Upgrade from 8.6.1 to 8.6.7 version Updated:10-11

    Hi, I am currenty running CUE (NME-CUE) version 8.6.1 on router 2851, I want to upgrade to version 8.6.7 (provide support CUCM 9.1). can somebody tell me In what case is used command "software install clean" and in what case is used command &quo

  • I can't update license for cue 3.2.1 Updated:11-30

    Hello I have unity express 3.2.1. I try to install cue-vm-license_25mbx_ccm_3.2.1.pkg. I get this error: cue-munich# software install upgrade url ftp://10.0.0.5/cue/cue-vm-license_25mbx_ccm_3.2.1.pkg username bla-la-la password 123 WARNING:: This com

  • Downloading CUE Port License Updated:11-30

    I    logged into Cisco.com/go/license and downloading the CUE Port license using    the series of attached serial numbers. The installation on the CUE failed,    with an error message "that the specified uid in the license file was not    found"

  • What is the best practice for voicemail migration? Updated:11-30

    Hello Tech Gurus, Am looking into a way to migrate our customer voicemail where their voicemail is on NME-CUE module. They want to migrate their voicemail's configurations, licenses and related (to SRE module) and I would like to know what is the bes

  • JTAPI login failed Updated:11-30

    iam getting the following error when doing the cisco unity express initialization wizard; "JTAPI login failed. Error while determining CCM version-1" ive done a search on the cisco error decoder but found nothing. please helpHi Celso, Here are s

  • AIM-CUE module Updated:11-30

    Hi I have installed an AIM-CUE into my 2801 router, but there are some files which am not sure which will work with this AIM-CUE which l have installed into the router 2801. These are files that l have and l need an advise concerning these files beca

  • Pre Requisites for Implementing the CUE Updated:11-30

    Hi, I have an  IP Telephony set up with CME in 2 different branches.We need to implemet the AA in sites. What are the pre requisites for hardware and license based  that need to check before implementing the CUE. one site having cisco 2911 router wit

  • CME 7.1 / CUE 3.1 - Fax Onramp - Bug or Config Issue? Updated:11-30

    I have searched long and hard for the correct way to do this but I can't find the information I think I need. I want to setup a dedicated incoming fax number (fax onramp) to accept a fax from the PSTN network (a traditional fax machine) and have it e

  • Router NME IPS - use promiscuous and inline mode simultaneous Updated:11-30

    Hi all, we are using the IPS module NME-IPS-K9 on a Cisco 2951 router. We like to use the IPS in promiscuous and inline mode simultaneous. For example traffic from a client to a server should pass through the IPS. But the IPS should only recieve a co

  • CUE AUS Language Pack Updated:11-30

    Hi all, anybody knows if there is the language pack in the suject for CUE 8.6? I'm looking for it but no luck. Any help is appreciated. Thank you in advance.Hi Stefano, You are most correct my friend. Sadly, there is no Aus. language pack Languages S

  • Install CUE 8.6.1 Updated:10-11

    Hi, I have an ISM module with the wrong image (SRSV instead of normal CUE) I have downloaded "cue-vm-full-k9.SPA.sme.8.6.1.prt1" and I am using the command: service-module isM 0/0 install url ftp://cisco:[email protected]/cue-vm-full-k9.SPA.sme.

  • How to change CUE ip address? Updated:10-11

    Hi, We moved to a new location and using comcast as ISP. I was setting up the phone system today and met a few problems. 1. First of all, all the phones are connected and working(total of 4), but I can only see 3 of them showing up in the CCA. Whats