Current Position:Home > labview do not Compile

labview do not Compile

Advertisement
  • "HOW to use Labview call Dll compiled by VC++" Updated:10-11

    "hello,I use VC++ compile a DLL,and i want to call DLL Function in LABVIEW program.But there is a dll function when i call it in labview.There is error.The prototype of Dll Function that make error is "USHORT DLLFUN __stdcall IBWRT(unsigned shor

  • "LabVIEW FPGA: The compilation failed due to timing violations, but there is no path information because the timing violations are not of type PERIOD Updated:10-11

    The compilation of my labview fpga vi fails with the error message "LabVIEW FPGA:  The compilation failed due to timing violations, but there is no path information because the timing violations are not of type PERIOD". In the 'final timing (pla

  • Labview does not compile my vi! Updated:11-30

    Labview does not compile my vi. It says "could not compile vi, bad dsoffset, dso = -1". I was still wiring the vi and was able to compile it several times before this error appeared. It shows a broken run arrowa and when I click on it to see the

  • Is it possible to take a labview application and compile it to run on an embedded processor? Updated:11-30

    Hi I was wondering if anybody out there knows if it is possible to take a labVIEW application and compile it to run on an embedded processor (e.g. ARM7)? If so does anybody know what the required capability of the target processor is (i.e. RAM, ROM e

  • LabView Crashing and compile server error. Updated:10-11

    Hi, I'm having some errors when I compile code for my FPGA (PXI-7831R). I am using LabView 8.2.1. Sometimes labView crashes completely and sometimes it comes up with a compile server error. My code contains 3 VI's. The first send sends digital output

  • LabVIEW FPGA: The compilation failed due to a xilinx error Updated:10-11

    I'm getting a "Compilation failed due to Xilinx error" trying to compile code in LabVIEW 2013.The code had compilated successfully in labview2012. Any suggestions on what is causing this issue? Details: ERROR:HDLCompiler:432 - "C:\NIFPGA\jo

  • Labview 2011 FPGA Compile Error Updated:10-11

    Hi, I'm new to FPGA. I want to use Labview 2011 SP1 with the Spartan 3E starter kit from Xilinx (Spartan 3E driver available from NI labview website). I'm trying to work my way through the examples that came with the driver. I've run into the same co

  • LabVIEW 2013 SP1 Compile Worker Fails Updated:11-30

    Hello, after receiving the new DVDs with LabVIEW 2013 SP1 and successfull installation, I wanted to compile my FPGA.vi. The Compile Worker does not start an I get the attached error Message. The additional Download of Xilinx Compilation tools 14.4 fr

  • Interface between LabView Executables and compiled MATLAB code Updated:11-30

    Query: Does anyone have experience of calling compiled MATLAB functions from a LabView Executable?Hello Well, I am using some applications as you ask. Some calculus was done in matlab, so, now, it is compiled as dll an front end and other calculatios

  • LABVIEW NXT.vi Compile to LEGO? Updated:11-30

    NI工程師你好: 我使用 LEGO 8527 Labview 8.5  為何使用NXT.VI ,Compile不進NXT控制器裡呢?                                                                       謝謝 圖片: http://tw.myblog.yahoo.com/jw!mzZdj.6AHxST_PYNzqJ3O6QEFW.R/gallery?fid=2 已解決! 轉到解決方案.Installation Instruct

  • How To: Reference LabVIEW VIs in Memory from a Compiled Application? Updated:11-30

    Hello all! This is my first post on these boards despite the fact that I have been doing LabVIEW for almost 8 years...so go easy on me! Basically my issue is this: I want to write a compiled application for my team to use to help us have a standardiz

  • Compile error of LabVIEW C code in vxworks 5.5.1/tornado 2.2.1 Updated:11-30

    Ladies and Gentlemen, I am trying to run a LabVIEW-generated C code {Calling a LabVIEW-built DLL in C to Acquire, Analyze, and Present Data (http://zone.ni.com/devzone/cda/epd/p/id/1515)} in VxWorks 5.5.1. However, I have the following errors in usin

  • Fpga compilation xilinx error 'Process "Map" failed' - 'unroutable situation' Updated:10-11

    When I try to compile a Labview fpga project on our new system, it fails with the following error summary (the full Xilinx log is attached): LabVIEW FPGA: The compilation failed due to a xilinx error. Details: ERROR:LIT:536 - IBUF symbol "aUserGpio&l

  • Fpga compile error Port width mismatch Updated:10-11

    When I try to compile a FPGA vi, the following error occurs.  LabVIEW FPGA: The compilation failed due to a Xilinx error. Details: ERROR: [Synth 8-549] port width mismatch for port 'cEIOParameter0Signal': port width = 32, actual width = 24 [C:/NIFPGA

  • FPGA code successfully compiled in 2010 is giving compilation error in 2014. Updated:10-11

    I have developed RS485 FPGA code and successfully compiled with LabVIEW FPGA 2010. Later changed the software to 2014 and installed Xilinx 14.7. Now if I compile the same code with LabVIEW 2014 compile worker, i am getting error 'Process "Synthesis&q

  • Compilation failed due to timing violations, Getting Xflow error and resources over use. Updated:10-11

    Hi, I am extensively using Fixed point math library functions which i have downloaded from NI website in my FPGA application.I am getting following errors while compiling the code. I would like to know is there any limitations in using fixed point fu

  • Xilinx Compilation Error: HDLCompiler:432 Formal eiosignal has no actual or default value Updated:10-11

    Hi, I have compiled several programs for sbRIOs previously but have not run into compilation errors before. I can't seem to find any support to see what is actually going poorly. Any help with this would be appreciated! The Compilation Status summary

  • HDL Compiler Error Updated:11-30

    Salve, per la mia applicazione uso un crate PXIe (1062Q) con un RT-module 8102 ed una FlexRIO 7962R. Alla FlexRIO è connesso un AM custom. Nella mia applicazione genero un IP-core con il coregen di xilinx da importare come CLIP nel mio progetto (è un

  • Output of LabView PID Control Toolkit Updated:11-30

    I am evaluating LabView to tune a PID loop.  From the datasheet, it looks like all of the analysis tools are there. I am not clear on the output.  Does it have a synthesis feature to create C code?  Or is it just a matter of plugging the tuning coeff

  • Using existing c code for usb-hid communicat​ion in labview Updated:11-30

    Hello, I want to write a simple temperatrue logger using labview and a external hardware which communicates over usb-hid. The external hardware uses an ATMEL 90USB162 µC and DS18B20 sensors. Link to the hardware: http://www.diamex.de/dxshop/USB-Tempe