Current Position:Home > Interface Dot11Radio0, failed - cmd busy

Interface Dot11Radio0, failed - cmd busy

Advertisement
  • Interface Dot11Radio0, failed - cmd busy -Traceback..... Updated:11-30

    hi everyone, please help me, i have a problem with cisco autonomous: Product/Model Number: AIR-AP1131AG-E-K9 System Software Filename: c1130-k9w7-tar.124-10b.JA System Software Version: 12.4(10b)JA Bootloader Version: 12.3(8)JEA the problem is that m

  • Aironet 1310 Error Dot11Radio0, failed - cmd busy Updated:11-30

    Hello Kollegues! I experience the following error and am courious if the radio has to be replaced? I could not find this error in the error reference so far. Thank you! Critical    Interface Dot11Radio0, failed - cmd busy -Traceback= 0x5DCB8 0x4EEC80

  • WiFi interface Dot11Radio0 fail to take encryption on 877W Updated:11-30

    Hi I need to activate WiFi on a Cisco 877W with Advanced IP Services 12.4-15 T1 IOS. The moment I try to configure the encryption it gives me an error message :"No more than 0 encrypted VLANs can be configured for Dot11Radio0"...  I removed the

  • Problema Interface Dot11Radio0 is reset Updated:11-30

        Porfavor pido puedan ayudarme urgente, ya he configurado casí todas laas posibilidades y no encuentro el problema. sobre Dot11Radio0 is reset, line protocol is down    aaa new-model aaa authentication fail-message ^CCCCCCCC!!!!!!!Fallo en login.

  • Cisco AP1231G failed to flash the interface on failed boot Updated:11-30

    Hello, I have an issue with Cisco AIR-AP1231G-E-K9 since I have rebooted it to reload startup conf : Now, radio is disabled. On web interface, Radio mac address is 0000.0000.0000 I tried a no shut on Dot11radio0 but didn't work. I tried to upload a n

  • Interface Dot11Radio0, cannot associate: No matching SSID Updated:11-30

    Hi all, I have a problem with a P2P Bridge with a couple of Aironet 1242AG. Sometimes this Bridge goes down, and if I change Channel, it goes up. When Bridge is down I can see this log in NoRoot: *Apr 23 04:12:20.002: %DOT11-4-UPLINK_ESTABLISHED: Int

  • Interface Dot11Radio0 cannot associate: No Response Updated:10-11

    Having an issue with a non-root bridge communication with the root device getting the error message - *Mar 1 12:55:34.159: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response *Mar 1 12:55:46.159: %DOT11-4-CANT_ASSOC: Interface D

  • %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down Updated:11-30

    Hello, On a 4402 wireless controller (7.0.220.0) with LAP1242AG-E-K9 and LAP1252AG-E-K9 access points I receive lots of messages like this: Dec  9 12:55:16 ap-a1 1466: AP:001a.2f58.d4d6: *Dec  9 11:55:16.174: %LINK-3-UPDOWN: Interface Dot11Radio0, ch

  • Event Log: Interface Dot11Radio0, parent lost: Had to lower data rate Updated:11-30

    Hi, AIR-AP1242 Firmware: 12.3(8)JEB AP -> WGB mobil station The event log from WGB have often this warning: %DOT!!-4-UPLINK_DOWN: Interface Dot11Radio0, parent lost: Had to lower data rate Way?... It is the first installation with this description.Is

  • VCS Connection Failed - 486 Busy Here Updated:11-30

    We create a conference in TMS - it adds the appropriate infrastructure, creates a conference ID, etc.  The first 2 people can dial into the conference without issue. Every additional person receives a busy tone.  When checking VCS - I see Conneciton

  • PropertyNode: Interface Information: Interface Description fails on second call Updated:11-30

    Hello all, I´m new here and I have a problem. As the subject already tells the property node: Interface Information: Interface Description fails on second call. I have written a SubVI to get the virtual COM Port of a specified Device, which is connec

  • Interface getting failed after changing the Business system to that service Updated:11-30

    Hello All, Our Env... is XI 3.0 and this is related to produciton env. Based on our client requirment to change the business system from client 871 to 100 for  one of the R3 system which is reciever type(rfc). After doing all the necessary changes ,

  • Payables Open Interface Pgm fails without any error(Very urgent) Updated:10-11

    All, I'm into an integration project where in I'm pushing Invoice doc from a third party appln to Oracle apps (11.5.10.2) thru payables open interface. The integration is smooth till today. We pushed a record today, but the concurrent neither picks u

  • Index creation failed in Business Objects Explorer Updated:10-11

    Hi, I installed the Business Objects Explorer ... But I can not index anything. When I try to index the following message appears: "Server, DRWBI001.PolestarIndexing, generated messages The Following: Index creation failed. File system Polestar excep

  • Service interface not listed in business system in ID. Updated:10-11

    Hi Experts, In my QA system service interfaces are not listed in business system in ID, i have added product and SWCV in SLD and i am still unable to see the service interfaces of SWCV that i have added. i have done SLD and CPA cache refresh, restart

  • No interfaces listed for ECC Business System in PI 7.1 for intrf. Detrm Updated:10-11

    Hi all, I have come across this situation earlier, did some settings in SLD ..tech system...(Don rembr it nw....) I am not able to see the list of interfaces for an ECC Bus.System during Interface determination, I manually have to key in the name of

  • OEM app server interface - Renderer failed:  servlet error and NoClassDefFoundError Updated:11-30

    Hello, I am having problems accessing my OEM (running on Sun Solaris) in an XSession/ssh terminal window on my Windows machine. It was working fine for months, and now I get the following errors on the OEM web browser interface page. I was wondering

  • ** Unable to see message interfaces in ID under Business Systems Updated:11-30

    Hi Friends, When I create sender / receiver agreement in ID by choosing the respective Business Systems I am not able to see my message interfaces. Then, I checked the SLD, our SWCV under Products are not assigned in the Business Systems. Then, I hav

  • CcBPM - How to use 1 Message Interface for 2 different Business System Updated:11-30

    Hi, I have this bpm scenario below : JDBC QUERY (ASYN) ---> RFC (SYNC) - > JDBC INSERT (ASYN) - > MAIL (ASYN). So Both JDBC INSERT and MAIL using the same data input from RFC response for instance i will named as  MI_RFC_RES_ASYN_ABS. I have prob

  • Intra-Interface-Traffic fails at first try - second try works Updated:11-30

    Hi, we are running two ASA5550 as fail-over. Everything works fine. But there is still a little "bug". same-security-traffic permit intra-interface is enabled. Now, let's open an PostgreSQL-Connection from 10.10.1.22 to 10.10.1.8 (same subnet, s