Current Position:Home > configure rss for lbfo teaming

configure rss for lbfo teaming

  • Hyper-V LBFO Teaming VMQ RSS-settings Updated:10-11

    Hi, We are running a six host Hyper-V Cluster on 2012 R2 Core machines. Since the environment was set up we have been receiving the following error: Source: Hyper-V-VmSwitch Event ID: 106 Description: Available processor sets of the underlying physic

  • LBFO team and VMQ configuration Updated:11-30

    Hi gang, So I am running Server 2012 R2 in a two node cluster with some teamed network cards (2 - dual 10 gig cards) The teaming is switch independent and dynamic. In the event viewer I am seeing the following error: Event ID: 106 Available processor

  • Event 106-VMSwitch Error:Available processor sets of the underlying physical NICs belonging to the LBFO team............... Updated:11-30

    I am Using Hyper-V 2012 R2. and the NIC Teaming mode is "Switch Independent (Dynamic)", I am getting the following Error on NIC Teaming on Both Hyper-V. Available processor sets of the underlying physical NICs belonging to the LBFO team NIC /DEV

  • Configure Rss in DMS Updated:11-30

    Dears, Can someone guide me hpw to configure RSS in DMS ?? RegradsYou might have to set a cross domain policy to display RSS feeds through your DMP, as these are actually flash modules. The way to do that is to put an xml file called crossdomain.xml

  • Poor Performance over Converged Networks using LBFO Team Updated:11-30

    Hi, I have  built a Hyper-v 2012 R2 cluster with converged networking and correct logical networks.  However, I notice that I am not able to utilise more than apprx 1gb over the converged network for live migration, cluster, management etc even thoug

  • Error creating TFSBuild.proj via Create Ant Build Configuration Wizard in Eclipse Team Explorer Updated:11-30

    In Eclipse Team Explorer, when I try to create TFSBuild.proj via Create Ant Build Configuration Wizard, when I click Finish, I get this error: Error creating build configuration files: Invalid server path or the archive with the same name already exi

  • PS Script to Automate NIC Teaming and Configure Static IP Address based off an Existing Physical NIC Updated:11-30

    # Retrieve IP Address and Default Gateway from static IP Assigned NIC and assign to variables. $wmi = Get-WmiObject Win32_NetworkAdapterConfiguration -Filter "IPEnabled = True" | Where-Object { $_.IPAddress -match '192\.' } $IPAddress = $wmi.IpA

  • Prevent LBFO Primary/Standby fallback Updated:11-30

    Hi All, I have a client requirement to implement network redundancy on a Windows Server 2012 R2 platform. So enter two switches, firewalls, routers etc. As part of this I have set up an LBFO team on NIC 1 & 2. The client has since informed me that th

  • Two teamed Gbe nics not transferring files at 2Gbps speeds Updated:11-30

    We are doing some testing with nic teaming to increase network throughput between servers.  We have two servers (Dell r815) with windows server 2012.  They are directly connected via two cat-6 straight-through cables, with teamed nics.  The teams use

  • Server 2012 R2 Network Teaming Issues After Adding WOW64 Feature Updated:10-11

    Recently I have had a specific issue adding the WOW64 feature to an active Server 2012 R2 server in core mode (no management).  The server had two active virtual machines.  A server 2008 R2 in version 1 mode and a 2012 R2 in version 2.   All were up2

  • The system Pages library and its RSS feed do not work properly in SharePoint 2010 Updated:10-11

    This question is about RSS feed for the system 'Pages' library in SharePoint 2010. Now there are 5 'News' pages in the system 'Pages' library. In each news page there is one field called 'Title' for the news title. One of the news page is named 'File

  • NIC Teaming on new 2012R2 install IntelX540-T2 Netgear XS712T not functioning properly Updated:11-30

    I have a new 2012R2 server with an Intel LOM X540-T2 Dual port, 10-gig copper NIC. I'm trying to team both ports to a Netgear 10-gig copper switch (XS712T, CAT6A cables) and not having much luck. Latest firmware/drivers all around. I reset to factory

  • Teaming with Windows 2012 DC (Datacenter Edition) Hyper V Host servers Updated:11-30

    HI We are preparing 2 Windows 2012 R2 DC edition servers, each of them has 4 NICs, planning to configure both HV host and guest clustering. One NIC will be used for host / HV management and Host cluster traffic, other 3 NICs will be configured in a s

  • Can you use NIC Teaming for Replica Traffic in a Hyper-V 2012 R2 Cluster Updated:11-30

    We are in the process of setting up a two node 2012 R2 Hyper-V Cluster and will be using the Replica feature to make copies of some of the hosted VM's to an off-site, standalone Hyper-V server. We have planned to use two physical NIC's in an LBFO Tea

  • Teaming or Port-channel support on NCS appliance Updated:11-30

    Hi, we have purchased one NCS PRIME-NCS-APL-K9 appliance. We are looking at connecting this box to two more swicthes configured in HSRP for the VLAN on which this box will be place. Can i configure active/stand-by teaming of both the ethernet ports a

  • Hyper-V cluster validation report "Found duplicate physical address" on nic team interfaces. Updated:11-30

    I recently built a Windows 2012 Hyper-V cluster with 5 nodes. The validation report shows “duplicate physical address” error (error text pasted below). The hardware: HP BladeSystem – servers are BL460c blades, in a c7000 enclosure, connected to HP Vi

  • Dynamic(Switch Independent) NIC Teaming Mode Problem Updated:11-30

    Hi, We are using Switch Independent Dynamic distribution NIC Teaming configuration on Hyper-V 2012 R2 cluster. In the following graphs between 19:48 - 19:58 you can see clearly how dynamic NIC teaming mode badly affected the web servers response tim

  • Collection of systems with no configured boundaries Updated:11-30

    Hello, I have systems in our console that are not in configured boundaries because other teams have installed SCCM agents. So I need a query to exclude all systems NOT within configured boundaries. Any thoughts?Can you add more detail.. As per my und

  • How to install JDI  & Configuration Updated:11-30

    Hi All, We are in much need of Version Controlling of our WebDynpro Project. Some how we couldnt able to configure JDI properly.. We cant even find what the problem is. WE done Team Build Scenario. I Request if any has details JDI Installation & Conf

  • Team calendar Error in Leave request Page .No Views found: Missing customiz Updated:11-30

    Hi all i am portal consultant , i dont know much abt HR related configuration required for ESS. Plz Tell me the what configuration Exactly needed for Team calender in a leave Request page. in R3 i have been to the the Tabel   V_PTREQ_TEAM  where i fo