Current Position:Home > Profiling on cisco WLC 7.6

Profiling on cisco WLC 7.6

Update:11-30Source: network consolidation
Advertisement
Hello,
We are implementing a new corporate wireless network with Cisco 5508 WLC 7.6 and 3700i LWAP. We are not running any RADIUS or EAP at the moment  and are starting with WPA2 w/ AES with a pre-shared key to start
we configure profiling as following :
each device have an specific vlan on each floor and configure AP group to separate the AP 
The issue we are having is iOS based devices (iPhone/iPad/android) doesn't take the correct vlan that assigned for each one of them ,instead
sometimes take an ip from the management vlan some time form the same vlan on other floor
Does anyone have any ideas or have run into this problem before?
Any help would greatly be appreciated.
Thanks!

The Best Answer

Advertisement
sometimes take an ip from the management vlan some time form the same vlan on other floor
You cannot guaranteed, that given floor client always connect to the same floor AP. Also if client moving from one floor to another, then client will retain the IP obtained from the other floor, even he moved to different floor. I would not do floor wise vlan assignment (at least building wise if that require).
If you take "debug client <mac_address>" output that will tells you what's going on. Below post gives you some reference how it should be under normal working condition.
http://mrncciew.com/2014/10/17/wlc-client-debug-part-2/
HTH
Rasika
**** Pls rate all useful responses ****
  • Profiling on cisco WLC 7.6 Update:11-30

    Hello, We are implementing a new corporate wireless network with Cisco 5508 WLC 7.6 and 3700i LWAP. We are not running any RADIUS or EAP at the moment  and are starting with WPA2 w/ AES with a pre-shared key to start we configure profiling as followi

  • Understanding statistics from a Cisco WLC? Update:11-30

    Hello, From the "Monitor" page on our Cisco WLC.  If you go to "Access Points" from the left side then choose one of the Radios like 802.11b/g/n.  That will list all the APs connected with your controller. 1) First question, some of th

  • Bonjour Discovery browser and cisco WLC mDNS Update:11-30

    Hello I'm using a Bonjour Discovery browser on an iPad to see if I can check what Bonjour services are available on a cisco 2504 running code 7.5.102.0. WLC is configured as per cisco documentation for mdns: Multicast disabled on WLC wired vlan (with

  • HA in Cisco WLC Update:10-11

    Hi friends, I am planning to have a wireless environment for a corporate company. I would like to have a Cisco wireless LAN controller 2100 series and 15 numbers of cisco aironet 1142 n access point. Since wireless is gonna be a very important medium

  • Cisco wlc ios 7.2 with clients windows 8 can not authenticate with 802.1x Update:10-11

    Hello my name is Ivan: I have a solution a unified solution wireless with a cisco wlc 7.2 and ap cisco. My issue is the follow: My users are using laptops with OS windows 8, and they can not access to the network wireless because they authenticate in

  • Cisco WLC 2504 webportal for Server 2008 R2 DC LDAP or RADIUS Update:10-11

    HI,Friends. I want to get my mobile or Notebook clients connecting to wireless and use my Domain users ,Cisco WLC 2504 to authenticate via LDAP or  RADIUS to our Windows Server 2008 Domain Controllers question: one,i can use my domain one Organizatio

  • Certificate based authentication with Cisco WLC and Juniper IC Update:11-30

    Hi I have a cisco WLC 4400 and Juniper IC which works as the external Radius server. I want the wireless clients to be authenticated using certificates. I know the Juniper IC can understand certificates. My question is can cisco WLC understand that t

  • Generate one time authentication for Guest on Cisco WLC Update:11-30

    Hi All Sorry for my question, because I just started to work with Cisco WLC. I have created some WLAN for local users with authentication by 802.1x + Radius by certificate. For Guest I used PSK with MAC-filtering. But I see that is not comfortable fo

  • Cisco WLC 2500 - 802.1x with Vasco Radius SMS OTP Update:11-30

    Hello folks, I have what seems to be a complex implementation with many things that need to be done on a customers network and I wanted to be pointed in the right direction. The current scenario is such, the customer has a Cisco WLC 2500 device that

  • Cisco WLC 5508 - NPS Radius Update:11-30

    Cisco WLC 5508 Software Version: 7.4.100.0 Windows Server 2008R2 I've got everything setup on the Windows Server 2008 side of things (certificates, radius clients, etc) I added the radius server on the WLC, and configured a new WLAN to use it. Both a