Current Position:Home > NI 6534 fails resource test.

NI 6534 fails resource test.

Update:11-30Source: network consolidation
Advertisement
The 6534 fails the 'resources test' under MAX.
Nothing is connected to the board. Board otherwise
seems to be producing NT crashes when used.
Any clues?
Thanks,
Scott
Details:
Error Message: The device is not responding to the
selected base address.
NI 6534 PCI form factor
Measurement Explorer 2.0.3.6
Windows NT V 4.0 SP 6
SBC is a ROBO-678 from Portwell.

The Best Answer

Advertisement
Hello;
This is pretty much looking like a hardware failure. One last test you can do before point the finger to the hardware is to do a fresh installation of NI-DAQ, on another machine (W98 or W2000 if possible), install the board and run MAX.
If the same behavior shows, the board is most likely bad, otherwise, you can try uninstall and reinstall the NI-DAQ driver on the machine which is presenting the problem.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments
  • NI 6534 fails resource test. Update:11-30

    The 6534 fails the 'resources test' under MAX. Nothing is connected to the board. Board otherwise seems to be producing NT crashes when used. Any clues? Thanks, Scott Details: Error Message: The device is not responding to the selected base address.

  • Mprotect failed: Resource temporarily unavailable error while starting JVM Update:11-30

    Hi All, I am using JDK 1.6.0_21 in sunos on sparc server. JDK_ java version "1.6.0_21" Java(TM) SE Runtime Environment (build 1.6.0_21-b07) Java HotSpot(TM) Server VM (build 17.0-b17, mixed mode) OS and Hardware config_ SunOS 5.10 Generic_142900

  • Error "fork failed: Resource temporarily unavailable" when trying to login Update:11-30

    I have a problem with a PPC-based server running OS X Server 10.4.11. Suddenly I'm unable to log in via SSH or use ARD (remote desktop) via the admin user account. In SSH it shows "Received disconnect from 1.2.3.4: 2: fork failed: Resource temporaril

  • Manual removal of failed resource Update:11-30

    I have a failed Hyper-V role in my HA cluster that I cannot remove.  The role shows in the cluster but any operation (including remove) fails with null pointer errors.  If I look at Hyper-V on the node that is supposed to be running that role, no VM

  • Rename Domain Controller Fails: resource in use Update:11-30

    I have windows server 2012 64 bit. It's a domain controller. It's new, no clients are in this domain as of now. I wish to rename the server. I tried both way, by user interface and by netdom. In both cases I get the error message: "The requested reso

  • Multi Resource Scheduling (MRS) - resources not visible on Gantt chart mode Update:10-11

    I need your expertise help to resolve this issue. We are on MRSS 7.0 and ECC 6.0. When I run transaction /MRSS/PLBOORG, I am able to see the demands show up. However from resources point of view, I can see them on a table based planning but not able

  • MRS (Multi Resource Scheduling) - Using standard HR qualifications Update:10-11

    We are using HR records to represent our resources and have decided not to use MRS qualifications but rather stay with standard HR qualifications.  Therefore, in basic settings, we have not turned on MRS qualifications.  Our challenge, however, is th

  • Issue with IP address resource Update:10-11

    Hi I have been having an issue on our file server cluster recently where an IP address for the backup LAN scope will not come online. This happened a few days ago and the IP address eventually went online, but now it has been failing for over of day

  • Including Logical Hostname as a Resource Dependency Update:11-30

    Hi Folks, We're setting up a Calendar Server. we assign a Logical Hostname resource on which the Calendar Clients connect to. These are the steps that are used: I created a Fail Over Resource Group called MS_RG_BUDDY and bring it online scrgadm -a -g

  • Open Environment error : Resource temporarily unavailable Update:11-30

    Hi, I use Berkeley DB 4.5.2 in a system with Intel PXA255, 64MB memory, 512MB USB disk. The system is Linux 2.4.18, compiler is arm-linux-gcc 2.95.3. I put database files on the USB disk (because the file size is more than 72MB), and the disk still g