Current Position:Home > Login problem in that the radius server is not configured. And the local user does not authenticate

Login problem in that the radius server is not configured. And the local user does not authenticate

Update:11-30Source: network consolidation
Advertisement
When trying to login, the message appears "No radius server configured" and the local user does not authenticate. How do I access without rebooting the Switch 6500 with CatOS.

The Best Answer

Advertisement
Hi PK.
Thanks for your Attention. You know how to insert a line configuration via SNMP RW  "set radius server 10.112.15.21 auth-port 1645 primary"?
I believe this way or can I work around the problem.
  • Login problem in that the radius server is not configured. And the local user does not authenticate Update:11-30

    When trying to login, the message appears "No radius server configured" and the local user does not authenticate. How do I access without rebooting the Switch 6500 with CatOS.Hi PK. Thanks for your Attention. You know how to insert a line config

  • Login problem. 10.3.9 Server & 10.4.8 Clients Update:11-30

    One server providing OD, DHCP and DNS. DNS works perfectly, both forward and reverse. 10.4 clients sometimes login like they should, but most often the login-window just hangs and nothing more happens. In rare cases the user gets logged in after wait

  • 10.4 login problems with a 10.5 server Update:11-30

    My 10.4.11 emacs are having a problem logging into my 10.5.5 xserve. When I try to login as a user I get this Message "You are unable to log in to the user account "XXXXXXXX" at this time. Logging in to the account failed becasue an error o

  • WLC "radius server overwrite interface" setting Update:11-30

    Hello I'm looking at using "radius server overwrite interface" on a WLAN as a replacement for Called-Station-ID for Radius to match on SSID. When I enable "radius server overwrite interface" on a WLAN and join a client to the SSID I ca

  • Global configuration command: radius-server Update:11-30

    Hi all, the goal is to authenticate users logging in to a 2950 switch running IOS 12.1(22)EA2 to a MS IAS radius server. Following the configuration guide, there should be a command radius-server in global configuration mode but I think this command

  • Cisco Switch connecting to Radius Server Update:11-30

    Hello Team, I discovered that anytime the Uplink of my Cisco C2960CG-8TC-L goes down and reconnects, before the switch connects with the Radius Server, the access ports starts to connect into Guest VLAN, which is not the correct production VLAN that

  • Using RSA RADIUS Server and WLC 7.4 to dynamically asssign users to VLAN Update:10-11

    Hello, What we are trying to do: John logs on to wifi using RSA fob for password. RSA sends back auth request with attibutes to WLC 7.4 that magically knows how to interpret the attributes and puts John on vlan 10. Mary logs on with her fob and gets

  • Flexconnect Radius Server Overwrite interface Question Update:11-30

    Hello All, Can someone confirm/comment on the following: In a flexconnect scenario, for site 1, i would like to source the radius requests to a remote radius (at the flexconnect site 1).  as i can understand i need to enable the RAdius Server Overwri

  • WCS reports Radius server port 1813 up and down. Update:11-30

    Hi all, Help me on this, please. I use Radius server 172.20.104.253 and .254 port 1812 to authenticate some wireless clients. However, the .254 keep failling, deactivate on port 1813 (this is from the log); resulting some clients can't authenticate.

  • Problems with re authentications in a wireless with WLC working with web authentication and a radius server Update:11-30

    Hi everyone, im having problems in a wireless network, the SSID has security layer 2 WPA, layer 3 web authentication (internal default page), and external RADIUS. When a client makes a roaming from one AP to another one or when he has a idle time, he