Current Position:Home > E4200 - came dead

E4200 - came dead

Update:11-30Source: network consolidation
Advertisement
I bought an E4200 and brought it to Brazil but for my surprise it came dead. The cisco's logo lights but the router system doesn't start. I also tried to reset it according the linksys support instruction but it didn't work. I'm feeling tricked because linksys told me that it has international warranty but don't.. I spoke with Linksys USA and they can't replace it since I'm in Brazil and Linksys Brazil can't replace it because they don't support the e4200 model yet. So I just lost my investment...Cisco-Linksys E4200 Maximum Performance Simultaneous Dual-Band Wireless-N Router

The Best Answer

Advertisement
As you menhioned about the cisco logo light lit-up on the router.. Did you check at back of the router where you plug the cables if the light lit-up there or not ..
If it does lit-up.. Check the ipaddress on your computer and try to ping the gateway address of the router.
And if it does'nt li-up.. try to change the Ethernet cable
Reset the router for 30 sec and then check the light status again.
Check if the LAN ( Local area connection ) is enabled or not.
  • E4200 - came dead Update:11-30

    I bought an E4200 and brought it to Brazil but for my surprise it came dead. The cisco's logo lights but the router system doesn't start. I also tried to reset it according the linksys support instruction but it didn't work. I'm feeling tricked becau

  • Linksys Smart Wifi - Not as many useful features as the Original Interface Update:11-30

    The user interface requires more work. It doesn't seem to have many of the useful features that were standard in the original interface. Is there any chance of us being able to choose to go back to the original version?I just purchased the EA6500.  A

  • E4200 - Range is not good! Update:11-30

    I purchased this unit to upgrade my wireless home network to improve my signal range as well as speed. I also added a WET610N wireless bridge to the mix too. I orginally had a WAP54G and because of signal issues I had to add a range extender to the m

  • E4200 Bridge Mode Update:11-30

    Can someone please point out what I am doing wrong here..... I have my main router, a E4200v2 which I use as a router and it provides wireless signal throughout my house, however reception is not as strong on the upper floor and there is a slight dea

  • Can I use an airport express to extend a Cisco E4200 802.11n or 802.11g wireless network? Update:11-30

    Can I use an Airport Express to extend a Cisco E4200 802.11n or 802.11g wireless network?  I'd like to improve access in a dead spot with an airport express. I know I can connect this wayt for airplay, but how about extending the signal? Thx! ACBAppl

  • New E4200 will not connect Update:11-30

    I just connected my new E4200 router, it worked fine until it recommended updating, as soon as it connected to do this, the power light started blinking every second and it will no longer respond. Support has not been helpful. Any ideas?This is unrea

  • Stuck: Need Disk repair but DVD drive dead and only have USB 1 Update:10-11

    [1 Ghz flat-panel iMac with USB 1 ports (no USB 2) and also Firewire 400] I noticed a strange discrepancy (small but concerning) between the size of a folder on hard drive (folder of all mp3's with no subfolders) and the backup of the same folder on

  • New C310 - Wireless working FAIL - Printer's wireless network seems to be dead Update:10-11

    Product: HP Photosmart Premium C310 OS: Windows Vista 64 bit and Windows 7 64 Bit Error: Wireless working: FAIL Changes: No changes since this is the first install of this printer ever Description: I've just unpacked my new C310 as a replacement for

  • Saving the data from a dead library Update:10-11

    So I've given up trying to rebuild my library (see here: http://discussions.apple.com/thread.jspa?messageID=11544400&#11544400) and was wondering if anyone had any thoughts on how I could extract the projects from an Aperture 3 library. In an Apertur

  • Creative Zen 32GB - Is it Dead? Update:10-11

    Hi. I bought a Creative Zen 32gb Flash player in January 2009. It was mostly OK for the first year or so. By then, it was almost full. Last summer, it began crashing on me every so often. I assumed it was just because it was almost full, but as time