Current Position:Home > Combination of barrel + pin cushion distortion in an old lens...

Combination of barrel + pin cushion distortion in an old lens...

Update:11-30Source: network consolidation
Advertisement
I have several precious 35mm Kodachrome slides that were shot with an early 80's vintage Nikon 24mm f/2.8 lens, that had a                 combination of barrel and pin cushion distortion at the same time.  In two important shots, the edge of the frame goes away from the center (barrel distortion)                 and closer to the corners of the frame, the same edge is being pulled in toward the center (pin cushion distortion).
I no longer have access to the lens, and doubtful if it would work on a modern digital body anyway.
Does anyone have any ideas on how to approach starting to create a profile for such a beast?
Thanks,
George

The Best Answer

Advertisement
It will be in 6.1, not 6.0.
See, for example, here:
http://robgalbraith.com/bins/content_page.asp?cid=7-10050-10649

Recommended Content

Database error: [Table 'ac_posts' is marked as crashed and should be repaired]

SELECT * FROM ac_posts WHERE `ID` IN (592289,2426867,149173,1877865,4334553,2064255,1777906,4575211,1996874,132557,2634532,356386,3640276,2529903,2703471,3556805,828899,2187126,1070475,4387793,3520347,5093946,4611406,2780725,1816184,2085335,2802812,3104981,1820535,4323578,2282643) LIMIT 15;