Current Position:Home > Audio Video Bridging

Audio Video Bridging

Update:11-30Source: network consolidation
Advertisement
I'm looking into interfacing with a DUT that has Ethernet Audio Video Bridging (AVB).  A protocol similar to Ethernet which is used for in vehicle audio and video transmission.  To test this interface I just need to provide a static image and then ask the DUT if everything is okay.  The actual vision analysis is a seperate test.
Has anyone done anything with AVB testing?  It appears to be an obstraction layer on top of UDP so I suspect if nothing else I can do low level UDP calls but I don't really know what I can or can't do.  Any help is appreicated, thanks.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

The Best Answer

Advertisement
Hi Hooovahh,
I've done some research in our internal systems and have not found any references to AVB. I think we'll need to see if anyone else in the community has done something similar. It also appears that AVB was renamed to "Time-Sensitive Networking" in November 2012.
If it is based on UDP, you should be able to use the lower-level UDP functions in LabVIEW to do the communication.
Best Regards,
Matthew B.
Applications Engineer
National Instruments
  • Audio Video Bridging Update:11-30

    I'm looking into interfacing with a DUT that has Ethernet Audio Video Bridging (AVB).  A protocol similar to Ethernet which is used for in vehicle audio and video transmission.  To test this interface I just need to provide a static image and then as

  • Audio Video Bridging on Cisco Switches Update:11-30

    Hi All,        I'm looking to implement AVB (IEEE 802.1AS, 802.1Qav, 802.1Qat and 802.1BA) on Cisco switches. I've searched on these forums, Cisco's website and google for any information there might be about AVB support on any Cisco switches. The cl

  • Using IOS Guaranteed Audio Video Conf. Bridge Update:11-30

    Using UCM 8.6 and IOS 15.1, I've set up a Conference bridge of type " Cisco IOS Guaranteed Audio Video Conference Bridge".  It is registered and everything looks good.  Will UCM use this same resource for standard, audio-only conferences?  Or do

  • How do I fix my audio/video in iChat 4.0.9?  it has worked perfectly until last night. Update:10-11

    How do I fix my audio/video in iChat 4.0.9?  it has worked perfectly until last night.  I have been having video calls iChat with my granddaughter for 4 weeks.  All of a sudden last night I wasn't able to complete the video/audio.  We were able to iC

  • FME 3.0 Audio from Audio Conferencing Bridge issue Update:11-30

    All Hi I am having an issue pulling audio from an audio conferencing bridge and then streaming it out via Flash Media Encoder 2.5. When I take another source, such as music or pre recorded voice, it sounds fine, however as soon as I switch to the aud

  • How can I display & split the audio & video from the same digitized clip? Update:10-11

    I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie. I want to "pull up" the aud

  • IDVD 08 audio/video sync drift toward end of DVD movie - fix/workaround? Update:10-11

    Anyone know how I can fix this issue? It's driving me crazy. I've just spent a few evenings in iMovie 08, editing together the video of my son's birth. All looked & amazingly good in iMovie. The "Large" .m4v file output by iMovie - Shared wi

  • How do I connect an iPhone 5S or 6 with audio video cables? Update:10-11

    How do I connect an iPhone 5S or 6 with audio video cables? Our van only has these connections. Apple did have a cable that worked with the 4/4S, but it does not work with an adapter on the 5S. I want audio only.I Thought I probably was. something li

  • Audio / video sync issue in playback Update:10-11

    for every recording i've made, when i play back the archive there is noticable lack of sync between the audio and the person's mouth.   the video seems to lag behind by almost a second.  the good news at least is that the delta is constant. has anyon

  • I am using ALSA and Icecat. When I play any html5 audio/video it works, but the next time i click on another audio/video link I lose sound. Update:10-11

    I am using Parabola (a fork of archlinux), Icecat 31.4 and ALSA Icecat and firefox seem to hold onto the soundcard when I click on a new html5 audio/video link in the same tab. The next video/audio element loses sound. If I wait 10 seconds and click